Further extensional mineralisation intercepted at Ternera
Released
Released
Announcement PDF
Sign up HERE to our Investor Hub
ASX ANNOUNCEMENT
11 MAY 2023
ASX:TSO OTCQB:TSORF
FURTHER EXTENSIONAL MINERALISATION
INTERCEPTED AT TERNERA
STEP-OUT DRILLING INTERCEPTS UP TO 44 G/T GOLD IN NEW ZONE
Tesoro Gold Limited (Tesoro or the Company) (ASX:TSO, OTCQB:TSORF) is pleased to report
initial assay results returned from extensional drilling of the Ternera Gold Deposit (Ternera),
confirms a new, high-grade extension to mineralisation along the Dorado Fault Zone (DFZ).
HIGHLIGHTS
•
Step-out drilling targeted potential mineralisation along the DFZ, up to 420m south of
the existing Ternera Mineral Resource Estimate (MRE).
•
Initial assay results confirm the location of the mineralised DFZ and associated goldbearing structures, best results included:
•
7.80m @ 2.78g/t Au from 16m (ZDDH0317), including;
−
5.00m @ 3.76g/t Au from 18m.
•
1.36m @ 9.00g/t Au from 54m (ZDDH0317).
•
4.60m @ 3.35g/t Au from 14m (ZDDH0319A), including;
−
•
2.50m @ 5.48g/t Au from 14m.
11.10m @ 0.86g/t Au from 104m (ZDDH0320), including;
−
2.00m @ 3.00g/t Au from 113m.
•
1.00m @ 44.00g/t Au from 215m (ZDDH0320).
•
7.00m @ 2.04g/t Au from 306m (ZDDH0320), including;
−
1.00m @ 7.43g/t Au from 306m.
•
Results highlight the significant high-grade potential for delineation of multiple, shallow
gold zones to the south of Ternera to be unlocked with further drilling.
•
Drilling now underway at the untested Kitsune target, approximately 2.5km north of
Ternera.
•
Assays returned from hole ZDDH0313 approximately 300m to the north of the Ternera
MRE included 1.40m @ 3.39g/t Au from 146m.
•
Since recommencement of drilling in January 2023, 17 holes have been completed for
3,635m, with assays outstanding for 7 holes.
•
Field mapping and sampling is ongoing to define additional Ternera look-alike targets.
Level 48, 152-158 St Georges Terrace, Perth
+61 8 6311 9160
info@tesorogold.com.au
ASX ANNOUNCEMENT 11 MAY 2023
Tesoro Managing Director, Zeff Reeves, commented:
“These holes demonstrate the potential for additional, shallow, high-grade extensions to the
Ternera deposit, which will be rapidly delineated with further drilling.
“The results are particularly important as they demonstrate gold mineralisation is continuous
within the Dorado Fault Zone and associated structures across all lithologies. This provides
significant potential for Mineral Resource expansion at Ternera, and the wider El Zorro Gold
Project.
“The DFZ has been mapped over 10km of strike and is consistently anomalous in gold with
numerous high-priority targets now clearly defined.
Drilling is now underway at Kitsune, where we are excited to begin a maiden program
testing a large 3.2km by 1.5km anomalous gold zone. Located 2.5km north of Ternera,
Kitsune has the potential to be a very large northern extension of our existing Mineral
Resource”.
Assay results have been received for the initial 10 holes of a 17 hole, 3,635m program
completed since January 2023. The program was designed to test the interpreted location
of the Dorado Fault Zone (DFZ), a primary control on gold mineralisation at Ternera. The DFZ
is a 20m to 100m wide zone of faulting and associated brecciation, quartz veining and
alteration that has been mapped over 10km from south to north (refer Figure 2).
Several holes failed to intercept the DFZ and returned no significant intercepts. The main
host rock for gold at Ternera is the intrusive El Zorro Tonalite (EZT), however significant results
from holes ZDDH0313, ZDDH0317, ZDDH0319A and ZDDH0320 reported within the DFZ, are
hosted within sedimentary rocks, indicating the potential for extension of the Ternera
Deposit across all rock types. Significant drill intercepts are presented in Table 1.
Drilling has now commenced at the Kitsune target, located approximately 2.5km north of
Ternera, to target the large surface gold anomaly where the DFZ crosses the favourable EZT
lithologies. An initial 6 holes are scheduled to be drilled over the coming weeks with assays
to follow upon completion.
TESOROGOLD.COM.AU
2
ASX ANNOUNCEMENT 11 MAY 2023
Figure 1 – Ternera Gold Deposit Drilling Plan on geology and results reported in this announcement showing
the approximate position of the Dorado Fault Zone. Datum PSAD56 19S
TESOROGOLD.COM.AU
3
ASX ANNOUNCEMENT 11 MAY 2023
Figure 2 – Ternera District Gold Prospects and Prospective Gold Corridor associated with the Dorado Fault
Datum PSAD56 19S. (MRE: Refer to Table 3 and ASX Announcement 9 March 2023).
Table 1 – Significant intercepts table for results reported in this announcement. Results are uncut, no top cut
has been applied. Refer Appendix 1 - JORC Tables for data aggregation criteria. Significant intercept is any
intercept with grade x width >0.30.
Hole_ID
ZDDH0312
ZDDH0313
ZDDH0313
ZDDH0313
ZDDH0313
ZDDH0314
ZDDH0315
ZDDH0316
ZDDH0317
ZDDH0317
ZDDH0317
ZDDH0317
ZDDH0318
ZDDH0319
ZDDH0319
ZDDH0319
From (m) To (m) Interval Au (g/t) Comments
0.00
NSI
112.00
113.00 1.00
0.33
146.00
147.40 1.40
3.39
169.00
170.00 1.00
0.29
179.00
180.00 1.00
0.34
0.00
NSI
0.00
NSI
0.00
NSI
16.20
24.00 7.80
2.78
18.00
23.00 5.00
3.76
53.00
55.80 2.80
4.76
54.00
55.36 1.36
9.00
0.00
NSI
11.00
12.00 1.00
0.40
14.80
15.60 0.80
0.70
19.00
20.00 1.00
0.56
TESOROGOLD.COM.AU
Hole_ID
From (m) To (m) Interval Au (g/t) Comments
ZDDH0319A 14.00
18.60 4.60
3.35
ZDDH0319A 14.50
17.00 2.50
5.48
including
ZDDH0319A 42.00
43.00 1.00
2.55
ZDDH0319A 81.00
82.00 1.00
0.46
ZDDH0319A 140.51
141.16 0.65
0.49
ZDDH0320 103.90
115.00 11.10
0.86
ZDDH0320 103.90
105.00 1.10
2.44
including
ZDDH0320 113.00
115.00 2.00
3.00
including
ZDDH0320 190.00
191.00 1.00
0.72
ZDDH0320 193.70
194.00 0.30
1.32
ZDDH0320 215.00
216.00 1.00
44.40
ZDDH0320 297.00
332.00 35.00
0.66
ZDDH0320 298.00
313.00 15.00
1.20
including
ZDDH0320 306.00
313.00 7.00
2.04
including
ZDDH0320 306.00
307.00 1.00
7.43
including
ZDDH0320 318.50
319.25 0.75
1.62
including
ZDDH0320 331.00
332.00 1.00
1.46
including
4
ASX ANNOUNCEMENT 11 MAY 2023
Table 2 – El Zorro Drill Hole location details for holes reported in this announcement. Datum PSAD56 19S.
Hole Location
Elevatio
Northing Easting
n
Hole Orientation
ZDDH00312
341912
7035497 511
-60
240
336.70
ZDDH00313
341795
7036832 660
-60
350
263.13
ZDDH00314
341909
7035560 519
-60
240
200.00
ZDDH00315
341901
7035626 529
-60
240
250.10
ZDDH00316
341883
7035693 520
-60
240
213.60
ZDDH00317
341850
7035674 518
-60
240
100.07
ZDDH00318
341857
7035605 516
-60
240
100.00
ZDDH00319
341797
7035903 586
-60
240
47.40
ZDDH00319A 341799
7035907 589
-60
240
331.90
ZDDH00320
341850
7036000 631
-60
240
354.05
ZDDH00321
341561
7035926 575
-60
240
200.00
ZDDH00322
341884
7035899 603
-60
240
280.00
ZDDH00323
341830
7035825 581
-60
240
250.03
ZDDH00324
341865
7035735 548
-60
240
44.90
ZDDH00324A 341867
7035735 548
-60
240
150.00
ZDDH00325
341881
7035799 589
-60
240
264.00
ZDDH00326
341574
7035680 500
-60
60
249.00
Hole ID
Dip
Drill Depth
(m)
Azimuth
Authorised by the Board of Tesoro Gold Ltd.
For more information:
Company:
Zeff Reeves, Managing Director
Tesoro Gold Limited
info@tesorogold.com.au
Table 3: Constrained Ternera MRE.
Au g/t
Area
Open Pit
Resource
Underground
Resource
Total Resources
cut off
Indicated
Inferred
Total
Mt
Au g/t
Koz
Mt
Au g/t
Koz
Mt
Au g/t
Koz
0.30
22.5
1.10
795
10.0
1.18
379
32.5
1.13
1,175
1.50
0.1
2.64
7
1.2
2.64
100
1.3
2.64
107
22.6
1.11
802
11.2
1.34
479
33.7
1.18
1,282
The updated MRE has been constrained to a US$1,800/oz optimised pit shell, with the
underground resource reported at a 1.50 g/t Au cut-off. The underground resource is
reported at a cut-off where gold mineralisation is consistently well-developed below the
optimised pit shell.
TESOROGOLD.COM.AU
5
ASX ANNOUNCEMENT 11 MAY 2023
About Tesoro
Future Performance
Tesoro Gold Limited was established with a
strategy of acquiring, exploring, and developing
mining projects in the Coastal Cordillera region of
Chile. The Coastal Cordillera region is host to
multiple world class copper and gold mines, has
well established infrastructure, service providers
and an experienced mining workforce. Large
areas of the Coastal Cordillera remain
unexplored due to the unconsolidated nature of
mining concession ownership, but Tesoro, via its incountry network and experience has been able
secure rights to a district scale gold project in-line
with the Company’s strategy. Tesoro’s 95% owned
Chilean subsidiary owns 85% of the El Zorro Gold
Project.
This announcement may contain certain forwardlooking statements and opinion. Forward-looking
statements, including projections, forecasts and
estimates, are provided as a general guide only
and should not be relied on as an indication or
guarantee of future performance and involve
known
and
unknown
risks,
uncertainties,
assumptions, contingencies and other important
factors, many of which are outside the control of
the Company and which are subject to change
without notice and could cause the actual results,
performance or achievements of the Company to
be materially different from the future results,
performance or achievements expressed or implied
by such statements. Past performance is not
necessarily a guide to future performance and no
representation or warranty is made as to the
likelihood of achievement or reasonableness of any
forward-looking statements or other forecast.
Nothing contained in this announcement, nor any
information made available to you is, or and shall
be relied upon as, a promise, representation,
warranty or guarantee as to the past, present or the
future performance of Tesoro.
Competent Persons Statements
The information in this report that relates to
Exploration Results and Exploration Target is
based on information compiled by Mr Zeffron
Reeves (B App Sc (Hons) Applied Geology) MBA,
MAIG). Mr Reeves is a member of the Australian
Institute of Geoscientists and a Director and
shareholder of the Company. Mr Reeves has
sufficient experience that is relevant to the style of
mineralisation and type of deposit under
consideration and to the activity which he is
undertaking to qualify as a Competent Person as
defined in the 2012 Edition of the Australasian
Code for Reporting of Exploration Results, Mineral
Resources and Ore Reserves. Mr Reeves consents
to the inclusion in this report of the matters based
on this information in the form and context in
which it appears.
The information in this report that relates to Mineral
Resources is based on information compiled by Mr
Lynn Widenbar, a Competent Person who is a
Member of The Australasian Institute of Mining and
Metallurgy. Mr Widenbar is acting as an
independent consultant to Tesoro Gold Limited. Mr
Widenbar has sufficient experience that is relevant
to the style of mineralisation and type of deposit
under consideration, and to the activity being
undertaken to qualify as a Competent Person as
defined in the 2012 Edition of the ‘Australasian
Code for Reporting of Exploration Results, Mineral
Resources and Ore Reserves’. The Company
confirms that it is not aware of any new information
or data that materially affects the information
included in the original announcement and all
material assumptions and technical parameters
underpinning the estimates continue to apply and
have not materially changed. The Company
confirms that the form and context in which the
applicable Competent Persons’ findings are
presented have not been materially modified from
the original announcement of 9 March 2023.
TESOROGOLD.COM.AU
6
ASX ANNOUNCEMENT 11 MAY 2023
APPENDIX 1: JORC TABLES
JORC CODE, 2012 EDITION | TABLE 1
Section 1: Sampling Techniques and Data
Criteria
JORC Code explanation
Commentary
Sampling
techniques
• Nature and quality of sampling (e.g. cut
channels, random chips, or specific
specialised industry standard
measurement tools appropriate to the
minerals under investigation, such as
downhole gamma sondes, or handheld
XRF instruments, etc.). These examples
should not be taken as limiting the broad
meaning of sampling.
Tesoro has completed 332 diamond drill holes for
109,600m in 2017, 2018, 2020, 2021, 2022 and 2023
(ZDDH0001 to ZDDH00326). Diamond drill holes were
drilled with HQ. Sampling was half core at geologically
defined and significant mineralisation boundaries.
• Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any
measurement tools or systems used.
Tesoro Diamond drill holes were drilled with HQ.
Sampling was half core at geological and significant
mineralisation boundaries. The CP consider this
appropriate for the style of mineralisation.
• Aspects of the determination of
mineralisation that are Material to the
Public Report. In cases where ‘industry
standard’ work has been done, this
would be relatively simple (e.g. ‘reverse
circulation drilling was used to obtain 1 m
samples from which 3 kg was pulverised
to produce a 30 g charge for fire assay’).
In other cases, more explanation may be
required, such as where there is coarse
gold that has inherent sampling
problems. Unusual commodities or
mineralisation types (e.g. submarine
nodules) may warrant disclosure of
detailed information.
Diamond drilling was used to obtain ½ core samples of
various lengths (minimum 0.25m), from which 1kg of
material was pulverised passing 200 mesh to produce
a 50g charge for fire assay fusion with a gravimetric
finish. Multielement assays were completed by 4-acid
digest with a 2.5g charge. The CP consider these
appropriate assay techniques.
Drilling
techniques
• Drill type (e.g. core, reverse circulation,
open-hole hammer, rotary air blast,
auger, Bangka, sonic, etc.) and details
(e.g. core diameter, triple or standard
tube, depth of diamond tails, facesampling bit or other type, whether core
is oriented and if so, by what method,
etc.).
Tesoro has completed 332 diamond drill holes for
109,600m in the MRE area. Diamond drill holes were
drilled with HQ. Sampling was half core at geological
and significant mineralisation boundaries. Standard
tube was used.
Drill sample
recovery
• Method of recording and assessing core
and chip sample recoveries and results
assessed.
Core recovery was estimated using the drillers
recorded depth marks against the length of the core
recovered. Reviewing the core photos, there are
occasional shears/faults where core is broken. There is
however no significant core loss.
• Measures taken to maximise sample
recovery and ensure representative
nature of the samples.
A single tube system was employed and in general
core recovery good.
The CP considers the sampling methodologies to be
appropriate for this style of mineralisation.
• Whether a relationship exists between
There appears to be no potential sample bias as there
sample recovery and grade and
was no regular loss of core.
whether sample bias may have occurred
due to preferential loss/gain of
fine/coarse material.
Logging
• Whether core and chip samples have
been geologically and geotechnically
logged to a level of detail to support
appropriate Mineral Resource
estimation, mining studies and
metallurgical studies.
• Whether logging is qualitative or
quantitative in nature. Core (or costean,
channel, etc.) photography.
TESOROGOLD.COM.AU
Geological core logging to a resolution of 25 cm was
undertaken with a record kept of, inter alia, colour,
lithology, weathering, grain size, mineralisation,
alteration, geotechnical characteristics etc. Diamond
core is stored at the Company’s warehouse.
Tesoro consider the data to be of an appropriate level
of detail to support a future resource estimation.
Logging of diamond core was qualitative and
diamond core was photographed.
7
ASX ANNOUNCEMENT 11 MAY 2023
Criteria
Subsampling
techniques and
sample
preparation
Quality of assay
data and
laboratory tests
JORC Code explanation
Commentary
• The total length and percentage of the
relevant intersections logged.
All drilled intervals are logged and recorded.
• If core, whether cut or sawn and
whether quarter, half or all core taken.
Drill core was cut, and half core was collected for
analysis
• If non-core, whether riffled, tube
sampled, rotary split, etc. and whether
sampled wet or dry.
Tesoro has not completed any percussion drilling.
• For all sample types, the nature, quality
and appropriateness of the sample
preparation technique.
Collection of half core ensured the nature, quality and
appropriateness of the collected sample.
The sample preparation of crushing half core at the
lab to mm size prior to splitting off a 50g charge (either
by cone/quarter or riffle) for pulverisation provides an
appropriate and representative sample for analysis.
• Quality control procedures adopted for
all subsampling stages to maximise
representivity of samples.
Half core was collected for the entirety of the Tesoro
drilling, as such there was consistency throughout the
drilling. Core was logged by a qualified geoscientist.
Each subsample is considered to be representative of
the interval.
• Measures taken to ensure that the
sampling is representative of the in-situ
material collected, including for instance
results for field duplicate/second-half
sampling.
Sampling of half core is representative of the in-situ
material. There are field duplicate samples collected
from the diamond core with irregular results. Field drill
core duplicates are irregular by nature and it has been
recommended by Tesoro’s consultants to use coarse
reject material to monitor the sample preparation.
• Whether sample sizes are appropriate to
the grain size of the material being
sampled.
Sample sizes collected were considered appropriate
to reasonably represent the material being tested.
• The nature, quality and appropriateness
of the assaying and laboratory
procedures used and whether the
technique is considered partial or total.
Assays reported in this report were undertaken at the
accredited laboratory of ALS Santiago, which is fully
certified. Core samples of various lengths were
assayed (minimum 0.25m) from which 1kg of material
was pulverized passing 200 mesh to produce a 50 g
charge for fire assay fusion with gravimetric finish.
Multielement assays were completed by 4-acid digest
with a 2.5 g charge.
All techniques are appropriate for the element being
determined.
Verification of
sampling and
assaying
• For geophysical tools, spectrometers,
handheld XRF instruments, etc., the
parameters used in determining the
analysis including instrument make and
model, reading times, calibrations
factors applied and their derivation, etc.
Standard chemical analyses were used for grade
determination. There was no reliance on determination
of analysis by geophysical tools.
• Nature of quality control procedures
adopted (e.g. standards, blanks,
duplicates, external laboratory checks)
and whether acceptable levels of
accuracy (i.e. lack of bias) and precision
have been established.
QAQC procedures included the insertion of Certified
Reference Materials (CRMs) (5%) and blank material
(2%), Check samples (5%) and check assaying (5%)
Cube Consulting Pty Ltd manage the database for
Tesoro.
The laboratories used have generally demonstrated
analytical accuracy at an acceptable level within 95%
confidence limits.
• The verification of significant intersections A number of independent consulting geoscientists
by either independent or alternative
(Cube Consulting, Oliver, and Cooley) external to
company personnel.
Tesoro have verified the intersections for holes
ZDDH0001 to ZDDH0080. Holes ZDDH0081 onwards
have been verified by multiple appropriately qualified
Company personnel.
• The use of twinned holes.
No twinned holes have been completed
Tesoro drilling is digitally entered and stored following
• Documentation of primary data, data
entry procedures, data verification, data documented core handling protocols.
The protocols are considered adequate.
storage (physical and electronic)
protocols.
No adjustments were made to Tesoro Drilling
• Discuss any adjustment to assay data.
TESOROGOLD.COM.AU
8
ASX ANNOUNCEMENT 11 MAY 2023
Criteria
JORC Code explanation
Location of data • Accuracy and quality of surveys used to
points
locate drillholes (collar and downhole
surveys), trenches, mine workings and
other locations used in Mineral Resource
estimation.
• Specification of the grid system used.
Commentary
Tesoro drill hole collars have been surveyed accurately
using differential GPS for all holes.
The grid system used PSAD56 19S
• Quality and adequacy of topographic
control.
Data spacing
and distribution
Orientation of
data in relation
to geological
structure
Sample security
The topography generated from an accurate
topographic survey data completed by a registered
surveyor and has been used for the current control.
• Data spacing for reporting of Exploration Drill hole spacing is variable between 25m and 200m
Results.
• Whether the data spacing and
distribution is sufficient to establish the
degree of geological and grade
continuity appropriate for the Mineral
Resource and Ore Reserve estimation
procedure(s) and classifications applied.
Areas with up to 50m drill spacing are considered to be
suitable for Mineral Resource Estimation. Areas of
sparser drilling and at the fringes and depth extents of
the deposit have been excluded from the MRE.
• Whether sample compositing has been
applied.
Sample compositing was not employed at the
sampling stage.
• Whether the orientation of sampling
achieves unbiased sampling of possible
structures and the extent to which this is
known, considering the deposit type.
Drill holes were drilled across the interpreted strike of
the mineralisation.
• If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to
have introduced a sampling bias, this
should be assessed and reported if
material.
Tesoro diamond drilling at various orientations does not
reveal any bias regarding the orientation of the
mineralised horizons.
• The measures taken to ensure sample
security.
Chain of Custody of digital data is managed by the
Company. Physical material was stored on site and,
when necessary, delivered to the assay laboratory.
Thereafter laboratory samples were controlled by the
nominated laboratory which to date has been Bureau
Veritas and ALS Santiago. All sample collection was
controlled by digital sample control file(s) and
hardcopy ticket books.
Audits or reviews • The results of any audits or reviews of
sampling techniques and data.
Where drill spacing is beyond 50m mineralisation has
been interpreted to continue and have been used in
the estimation of the Exploration Target. Drill spacing
up to 200m has been used in the Exploration Target
Estimation
No audits have been undertaken.
Section 2: Reporting of Exploration Results
Criteria
JORC Code explanation
Commentary
Mineral
tenement
and land
tenure status
• Type, reference name/number, location
and ownership including agreements or
material issues with third parties such as
joint ventures, partnerships, overriding
royalties, native title interests, historical
sites, wilderness or national park and
environmental settings.
Information regarding tenure is included in the company’s
December 2022 quarterly report released to the ASX on
31 January 2023.
• The security of the tenure held at the
time of reporting along with any known
impediments to obtaining a licence to
operate in the area.
The Concession is believed to be in good standing with
the governing authority and there is no known
impediment to operating in the area.
• Acknowledgment and appraisal of
exploration by other parties.
Little historical exploration has been undertaken in either
project area. Coeur d’Alene’s Chilean exploration division
undertook activities on the Ternera prospect, under an
option agreement with the previous owners between April
1990 and January 1993.
Exploration
done by
other parties
TESOROGOLD.COM.AU
Tesoro Resources Ltd, 95% owned Chilean subsidiary,
Tesoro Mining Chile SpA, owns 85% of the El Zorro Gold
Project Concessions.
9
ASX ANNOUNCEMENT 11 MAY 2023
Criteria
JORC Code explanation
Commentary
Geology
• Deposit type, geological setting and
style of mineralisation.
The mineralisation model is considered to be an intrusive
related gold deposit. The key characteristics that are
consistent with this style deposit include:
• Low sulphide content, (typically <5%); reduced ore
mineral assemblage that typically comprises pyrite and
lacks primary magnetite or hematite
• Mineralisation occurs as sheeted vein deposits or
stockwork assemblages and often combine gold with
variably elevated Bi, W, As, Mo, Te, and/or Sb but low
concentrations of base metals as seen in the initial four
holes by Tesoro at El Zorro
• Restricted and commonly weak proximal hydrothermal
alteration
• Intrusions of intermediate to felsic composition.
Drillhole
information
• A summary of all information material to
the understanding of the exploration
results including a tabulation of the
following information for all Material
drillholes:
Exploration results are not being reported. Drill hole data
relevant to the MRE is presented in the report.
o easting and northing of the drillhole
collar
o elevation or RL (Reduced Level –
elevation above sea level in metres)
of the drillhole collar
o dip and azimuth of the hole
o downhole length and interception
depth
o hole length.
• If the exclusion of this information is
justified on the basis that the information
is not Material and this exclusion does
not detract from the understanding of
the report, the Competent Person
should clearly explain why this is the
case.
Data
aggregation
methods
Relationship
between
mineralisation
widths and
intercept
lengths
• In reporting Exploration Results,
weighting averaging techniques,
maximum and/or minimum grade
truncations (e.g. cutting of high grades)
and cut-off grades are usually Material
and should be stated.
Exploration results are not being reported.
• Where aggregate intercepts
incorporate short lengths of high grade
results and longer lengths of low grade
results, the procedure used for such
aggregation should be stated and
some typical examples of such
aggregations should be shown in detail.
Exploration results are not being reported.
• The assumptions used for any reporting
of metal equivalent values should be
clearly stated.
No metal equivalents are reported.
• These relationships are particularly
important in the reporting of Exploration
Results.
• If the geometry of the mineralisation
with respect to the drillhole angle is
known, its nature should be reported.
The mineralisation forms sub-vertical sheeted veins and
individual veins and may form plunging zones within the
mineralised structures. Drilling by Tesoro has been
undertaken to test these orientations.
• If it is not known and only the downhole
lengths are reported, there should be a
clear statement to this effect (e.g.
‘downhole length, true width not
known’).
TESOROGOLD.COM.AU
10
ASX ANNOUNCEMENT 11 MAY 2023
Criteria
JORC Code explanation
Commentary
Diagrams
• Appropriate maps and sections (with
scales) and tabulations of intercepts
should be included for any significant
discovery being reported These should
include, but not be limited to a plan
view of drillhole collar locations and
appropriate sectional views.
Relevant maps and diagrams are included in the body of
the report.
Balanced
reporting
• Where comprehensive reporting of all
Exploration Results is not practicable,
representative reporting of both low
and high grades and/or widths should
be practiced to avoid misleading
reporting of Exploration Results.
Exploration results are not being reported.
Other
substantive
exploration
data
• Other exploration data, if meaningful
and material, should be reported
including (but not limited to): geological
observations; geophysical survey results;
geochemical survey results; bulk
samples – size and method of
treatment; metallurgical test results; bulk
density, groundwater, geotechnical
and rock characteristics; potential
deleterious or contaminating
substances.
All material exploration data is reported in the body of the
report.
Further work
• The nature and scale of planned further
work (e.g. tests for lateral extensions or
depth extensions or large-scale step-out
drilling).
Further work will be focused on drill testing the Ternera
mineralisation and additional prospects as defined in the
work program. Core will be used for metallurgical testwork
and further resource modelling is planned.
• Diagrams clearly highlighting the areas
of possible extensions, including the
main geological interpretations and
future drilling areas, provided this
information is not commercially sensitive.
Diagrams have been included in the body of this report.
TESOROGOLD.COM.AU
11
Share your feedback
Discover