El Zorro Drilling Intercepts up to 924 g/t Au
Released
Released
Announcement PDF
Sign up HERE to our Investor Hub
ASX ANNOUNCEMENT
28 OCTOBER 2024
ASX:TSO OTCQB:TSORF
EL ZORRO DRILLING INTERCEPTS UP TO 924 G/T AU
INCLUDING 46.67M @ 11.86G/T AU1
Tesoro Gold Limited (Tesoro or the Company) (ASX:TSO, OTCQB:TSORF) is pleased to report
significant assay results from recent drilling at the El Zorro Gold Project in Chile (El Zorro).
Drilling intercepted wide, high-grade gold mineralisation in the northern area of the Ternera
Gold Deposit (Ternera). This includes the highest grade assay ever recorded at Ternera,
924.00g/t Au over 0.50m from 78.10m (ZDDH0349A).
HIGHLIGHTS
•
Multiple high-grade gold zones intercepted in the northern area of the Ternera Gold
Deposit as part of the current infill and extensional drilling program.
•
Hole ZDDH0349A intercepted;
•
23.65m @ 1.73/t Au from 10.10m, including;
•
6.70m @ 4.67g/t Au from 18.30m;
•
4.25m @ 2.15g/t Au from 47.75m and;
•
46.15m @ 11.86g/t Au from 77.15m, including;
−
•
22.25m @ 23.66g/t Au from 77.15m, comprising
•
1.85m @ 263.00g/t Au from 77.15m; and
•
0.50m @ 924.00g/t Au from 78.15m.
10.00m @ 1.72g/t Au from 147.00m, including;
•
•
Significant results returned from drilling at Ternera East further extended mineralisation,
with intercepts from ZDDH0344 including:
•
24.40m @ 0.75g/t Au from 79.60m, including;
•
•
3.88m @ 3.46g/t Au from 100.12m and;
10.50m @ 1.61g/t Au from 214.00m, including;
•
•
4.00m @ 6.23g/t Au from 147.00m.
3.95m @ 3.29g/t Au from 220.55m.
Drilling is ongoing at Ternera and Ternera East, with the aim of further expansion and
definition of mineralisation.
1 Results are uncut, no top cut has been applied.
Level 39, 152-158 St Georges Terrace, Perth
+61 8 6383 7883
info@tesorogold.com.au
ASX ANNOUNCEMENT 28 OCTOBER 2024
Tesoro Managing Director, Zeff Reeves, commented:
“The exceptional results from hole ZDDH0349A have significantly expanded the mineralised
zone in the northern part of the Ternera Mineral Resource boundary. This clearly
demonstrates the potential to add additional resource ounces with further infill and
extensional drilling at the Deposit. Achieving the highest ever assay from drilling at Ternera 924g/t Au - highlights the very high-grade nature of the wide, continuous gold zones within
the Deposit.
These results, combined with the additional positive outcomes from the Ternera East zone,
demonstrate the potential to continue expanding the known gold at El Zorro. The current
drill program will continue over the coming months.”
A’
A
Figure 1: El Zorro Gold Project – Ternera area. Drill locations in the current program, with new results highlighted
in gold. Previously announced results shown in white (refer ASX Announcements 23 March 2021, 25 June 2021, 3
November 2021, 8 November 2022, 18 September 2023, 13 June 2024, and 2 July 2024). Section location for
Figure 2 shown at A-A’ - Datum PSAD56 19S.
TESOROGOLD.COM.AU
2
ASX ANNOUNCEMENT 28 OCTOBER 2024
Diamond drilling delivers wide, high-grade gold intercept
Tesoro’s current diamond drilling program is targeting key areas within a 1.5 km radius of the
existing 1.3 Moz Ternera Deposit, as well as conducting infill and extensional drilling of the
Ternera Mineral Resource Estimate (MRE) (refer to Figure 1). Results have been received from
eight holes of extensional drilling and one hole of infill drilling at Ternera.
Hole ZDDH349A is part of the infill program designed to improve resource classification and
extend known mineralised zones within the Deposit. Drilled in the northern area, this hole has
significantly widened the high-grade gold zones within the MRE.
The hole returned three well-mineralised intercepts, including a main zone of 46.67 @
11.86g/t Au from 77.15m, featuring the highest gold assay recorded at Ternera of 0.5m @
924.00g/t Au from 78.15m.
Figure 2: El Zorro Gold Project – Section looking north-west showing results from ZDDH0349A significantly
broadening the +1g/t Au mineralised envelope in the northern part of the Deposit (shown in yellow). The
mineralised zone intercepted remains open to the north, assays for ZDDH0350 remain outstanding. Previous
drilling shown as pale grey drill traces.
Positive drill results were also received from an additional hole at the recent Drone Hill
discovery, five holes from Ternera East, and one hole from Toro Blanco (refer to Figure 1).
Significant intercepts are presented in Table 1.
TESOROGOLD.COM.AU
3
ASX ANNOUNCEMENT 28 OCTOBER 2024
At Ternera East, all holes have intersected the target El Zorro Tonalite (EZT) lithology,
delineating a significant new gold zone over a strike length of approximately 300m. These
results will support the initial 3D modelling of the Ternera East zone for further drilling. The
mineralisation at Ternera East is currently interpreted to be a fault offset of the main Ternera
Deposit, with the eastern side of the fault uplifting the EZT to shallower levels. The newly
identified mineralisation occurs approximately 300m east of the existing Ternera Mineral
Resource and Phase 1 Scoping Study open pit (refer ASX Announcement 2 July 2024). Full
drill hole details are presented in Appendix 1.
Drilling at El Zorro is planned to continue over the coming months, assays remain outstanding
for 5 holes.
Table 1: Significant intercepts table for results reported in this announcement. Results are uncut, no top cut has
been applied. Refer Appendix 1 - JORC Tables for data aggregation criteria. Significant intercept is defined as
any intercept with a downhole grade x width >0.25. NSI denotes No Significant Intercept.
Hole_ID
ZDDH0339A
ZDDH0340
ZDDH0342
ZDDH0343
ZDDH0344
ZDDH0344
ZDDH0344
ZDDH0344
ZDDH0344
ZDDH0344
ZDDH0344
ZDDH0344
ZDDH0345
ZDDH0345
ZDDH0346
ZDDH0347
ZDDH0347
ZDDH0347
ZDDH0349A
ZDDH0349A
ZDDH0349A
ZDDH0349A
ZDDH0349A
ZDDH0349A
ZDDH0349A
ZDDH0349A
ZDDH0349A
ZDDH0349A
ZDDH0349A
ZDDH0349A
ZDDH0349A
TESOROGOLD.COM.AU
From (m)
121.00
39.10
79.60
81.50
92.00
100.12
167.00
214.00
220.55
220.55
318.00
340.46
163.89
224.00
320.10
441.50
10.10
18.30
47.75
77.15
77.15
77.15
78.15
147.00
147.00
219.00
223.00
242.00
334.50
To (m) Interval
0.00
123.00 2.00
40.00 0.90
0.00
104.00 24.40
81.84 0.34
93.00 1.00
104.00 3.88
168.70 1.70
224.50 10.50
224.50 3.95
222.53 1.98
319.00 1.00
342.00 1.54
165.13 1.24
224.55 0.55
323.45 3.35
443.07 1.57
33.75 23.65
25.00 6.70
52.00 4.25
123.82 46.67
99.40 22.25
79.00 1.85
78.65 0.50
157.00 10.00
151.00 4.00
243.70 24.70
225.00 2.00
243.00 1.00
336.04 1.54
Au (g/t) Comments
Buzzard Prospect - NSI
1.82
3.01
Drone Hill
NSI
0.75
3.33
including
1.36
including
3.46
3.01
1.61
3.29
including
5.97
1.36
0.87
2.48
1.43
1.60
1.07
1.73
4.68
including
2.15
11.86
including
23.66
including
263.00
including
924.00
including
1.72
6.24
including
0.37
1.21
including
1.64
1.19
4
ASX ANNOUNCEMENT 28 OCTOBER 2024
Authorised by the Board of Tesoro Gold Ltd.
For more information:
Company:
Zeff Reeves, Managing Director
Tesoro Gold Limited
info@tesorogold.com.au
Table 2 - Constrained Ternera MRE.
Au g/t
Area
Open Pit
Resource
Underground
Resource
Total Resources
cut off
Indicated
Inferred
Total
Mt
Au g/t
Koz
Mt
Au g/t
Koz
Mt
Au g/t
Koz
0.30
22.5
1.10
795
10.0
1.18
379
32.5
1.13
1,175
1.50
0.1
2.64
7
1.2
2.64
100
1.3
2.64
107
22.6
1.11
802
11.2
1.34
479
33.7
1.18
1,282
The updated MRE has been constrained to a US$1,800/oz optimised pit shell, with the underground resource
reported at a 1.50 g/t Au cut-off. The underground resource is reported at a cut-off where gold mineralisation is
consistently well-developed below the optimised pit shell.
Indicated
Inferred
Total
Au g/t cut off
2.00
Mt
2.6
Au g/t
3.75
Koz
317
Mt
2.0
Au g/t
3.71
Koz
241
Mt
4.7
Au g/t
3.73
Koz
558
1.00
7.2
2.25
523
5.6
2.24
400
12.8
2.24
923
0.50
16.3
1.39
727
12.8
1.37
561
29.1
1.38
1,288
0.30
23.2
1.09
815
19.4
1.03
645
42.6
1.07
1,459
Unconstrained Ternera MRE reported at various cut offs to the 200mRL.
For full details of the Ternera Deposit Mineral Resource Estimate (802 koz Indicated, 479 koz Inferred), refer to
ASX Announcement dated 9 March 2023. .
TESOROGOLD.COM.AU
5
ASX ANNOUNCEMENT 28 OCTOBER 2024
About Tesoro
Future Performance
Tesoro Gold Limited has discovered and defined the
first Intrusive Related Gold System in Chile. The 1.3M oz
Ternera discovery is in the Coastal Cordillera region
of Chile. The Coastal Cordillera region is host to
multiple world-class copper and gold mines, has well
established infrastructure, service providers and an
experienced mining workforce. Large areas of the
Coastal Cordillera remain unexplored due to the
unconsolidated nature of mining concession
ownership, but Tesoro, via its in-country network and
experience has been able secure rights to the districtscale El Zorro gold project in-line with the Company’s
strategy. Tesoro’s 95% owned Chilean subsidiary owns
93.8% of the El Zorro Gold Project.
This announcement may contain certain forwardlooking statements and opinions. Forward-looking
statements, including projections, forecasts and
estimates, are provided as a general guide only and
should not be relied on as an indication or guarantee
of future performance and involve known and
unknown
risks,
uncertainties,
assumptions,
contingencies and other important factors, many of
which are outside the control of the Company and
which are subject to change without notice and could
cause the actual results, performance or achievements
of the Company to be materially different from the
future results, performance or achievements expressed
or implied by such statements. Past performance is not
necessarily a guide to future performance and no
representation or warranty is made as to the likelihood
of achievement or reasonableness of any forwardlooking statements or other forecast. Nothing
contained in this announcement, nor any information
made available to you is, or and shall be relied upon as,
a promise, representation, warranty or guarantee as to
the past, present or the future performance of Tesoro
Gold.
Competent Persons Statements
The information in this report that relates to Exploration
Results is based on information compiled by Mr Zeffron
Reeves (B App Sc (Hons) Applied Geology) MBA,
MAIG). Mr Reeves is a member of the Australian Institute
of Geoscientists and a Director and shareholder of the
Company. Mr Reeves has sufficient experience that is
relevant to the style of mineralisation and type of
deposit under consideration and to the activity which
he is undertaking to qualify as a Competent Person as
defined in the 2012 Edition of the Australasian Code for
Reporting of Exploration Results, Mineral Resources and
Ore Reserves. Mr Reeves consents to the inclusion in this
report of the matters based on this information in the
form and context in which it appears.
The information in this report that relates to Mineral
Resources is based on information compiled by Mr Lynn
Widenbar, a Competent Person who is a Member of The
Australasian Institute of Mining and Metallurgy. Mr
Widenbar is acting as an independent consultant to
Tesoro Gold Limited. Mr Widenbar has sufficient
experience that is relevant to the style of mineralisation
and type of deposit under consideration, and to the
activity being undertaken to qualify as a Competent
Person as defined in the 2012 Edition of the ‘Australasian
Code for Reporting of Exploration Results, Mineral
Resources and Ore Reserves’. The Company confirms
that the form and context in which the Competent
Person’s findings are presented have not been
materially modified from the original announcement on
9 March 2023.
TESOROGOLD.COM.AU
6
ASX ANNOUNCEMENT 28 OCTOBER 2024
APPENDIX 1: DRILLING DETAILS
Hole Location
Hole ID
Northing
ZDDH00336 341247
ZDDH00337 341259
ZDDH00337A 341259
ZDDH00338 341448
ZDDH00339 342386
ZDDH00339A 342394
ZDDH00340 342258
ZDDH00341 342276
ZDDH00342 341283
ZDDH00343 341682
ZDDH00344 342306
ZDDH00345 342239
ZDDH00346 342110
ZDDH00347 342283
ZDDH00348 342122
ZDDH00349A 341968
ZDDH00350 341908
ZDDH00351 341838
ZDDH00352 341779
Easting
7036902
7036856
7036857
7036627
7034313
7034308
7036280
7036185
7036941
7036408
7036207
7036207
7036836
7036134
7035963
7036455
7035998
7036097
7036073
Hole
Orientation
Drill Depth (m)
Elevatio
Dip Azimuth
n
658
-60 20
342.55
623
-60 20
24.95
625
-60 20
280.00
632
-60 330
298.40
620
-60 0
68.70
618
-60 0
197.40
648
-60 0
230.00
598
-60 0
410.15
677
-60 240
281.40
596
-60 240
180.50
630
-60 0
281.50
640
-60 0
420.00
820
-60 0
224.50
599
-60 0
472.30
607
-60 0
327.65
660
-60 10
412.70
642
-65 0
478.70
619
-55 0
360.10
584
-65 0
506.00
TARGET
DRONEHILL
DRONEHILL (abandoned)
DRONEHILL
DRONEHILL
BUZZARD (abandoned)
BUZZARD
TERNERA EAST
TERNERA EAST
DRONEHILL
TERNERA
TERNERA EAST
TERNERA EAST
TORO BLANCO
TERNERA EAST
TERNERA EAST
TERNERA
TERNERA
TERNERA
TERNERA
APPENDIX 2: JORC TABLES
Section 1: Sampling Techniques and Data
Criteria
JORC Code explanation
Commentary
Sampling
techniques
• Nature and quality of sampling (e.g. cut
channels, random chips, or specific
specialised industry standard
measurement tools appropriate to the
minerals under investigation, such as
downhole gamma sondes, or handheld
XRF instruments, etc.). These examples
should not be taken as limiting the broad
meaning of sampling.
Tesoro has completed 362 diamond drill holes for
116,508m in 2017, 2018, 2020, 2021, 2022, 2023 and 2024
(ZDDH0001 to ZDDH00352) at the El Zorro Gold Project.
Diamond drill holes were drilled with HQ. Sampling was
half core at geologically defined and significant
mineralisation boundaries.
• Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any
measurement tools or systems used.
Tesoro Diamond drill holes were drilled with HQ.
Sampling was half core at geological and significant
mineralisation boundaries. The CP consider this
appropriate for the style of mineralisation.
• Aspects of the determination of
mineralisation that are Material to the
Public Report. In cases where ‘industry
standard’ work has been done, this
would be relatively simple (e.g. ‘reverse
circulation drilling was used to obtain 1 m
samples from which 3 kg was pulverised
to produce a 30 g charge for fire assay’).
In other cases, more explanation may be
required, such as where there is coarse
gold that has inherent sampling
problems. Unusual commodities or
mineralisation types (e.g. submarine
nodules) may warrant disclosure of
detailed information.
Diamond drilling was used to obtain ½ core samples of
various lengths (minimum 0.25m), from which 1kg of
material was pulverised passing 200 mesh to produce
a 50g charge for fire assay fusion with a gravimetric
finish. Multielement assays were completed by 4-acid
digest with a 2.5g charge. The CP consider these
appropriate assay techniques.
• Drill type (e.g. core, reverse circulation,
open-hole hammer, rotary air blast,
Tesoro has completed 362 diamond drill holes for
116,508m at the El Zorro Gold Project. Diamond drill
Drilling
techniques
TESOROGOLD.COM.AU
The CP considers the sampling methodologies to be
appropriate for this style of mineralisation.
7
ASX ANNOUNCEMENT 28 OCTOBER 2024
Criteria
Drill sample
recovery
JORC Code explanation
Commentary
auger, Bangka, sonic, etc.) and details
(e.g. core diameter, triple or standard
tube, depth of diamond tails, facesampling bit or other type, whether core
is oriented and if so, by what method,
etc.).
holes were drilled with HQ. Sampling was half core at
geological and significant mineralisation boundaries.
Standard tube was used.
• Method of recording and assessing core
and chip sample recoveries and results
assessed.
Core recovery was estimated using the drillers
recorded depth marks against the length of the core
recovered. Reviewing the core photos, there are
occasional shears/faults where core is broken. There is
however no significant core loss.
• Measures taken to maximise sample
recovery and ensure representative
nature of the samples.
A single tube system was employed and in general
core recovery good.
• Whether a relationship exists between
There appears to be no potential sample bias as there
sample recovery and grade and
was no regular loss of core.
whether sample bias may have occurred
due to preferential loss/gain of
fine/coarse material.
Logging
Subsampling
techniques and
sample
preparation
Quality of assay
data and
laboratory tests
• Whether core and chip samples have
been geologically and geotechnically
logged to a level of detail to support
appropriate Mineral Resource
estimation, mining studies and
metallurgical studies.
Geological core logging to a resolution of 25 cm was
undertaken with a record kept of, inter alia, colour,
lithology, weathering, grain size, mineralisation,
alteration, geotechnical characteristics etc. Diamond
core is stored at the Company’s warehouse.
• Whether logging is qualitative or
quantitative in nature. Core (or costean,
channel, etc.) photography.
Logging of diamond core was qualitative and
diamond core was photographed.
• The total length and percentage of the
relevant intersections logged.
All drilled intervals are logged and recorded.
• If core, whether cut or sawn and
whether quarter, half or all core taken.
Drill core was cut, and half core was collected for
analysis
• If non-core, whether riffled, tube
sampled, rotary split, etc. and whether
sampled wet or dry.
Tesoro has not completed any percussion drilling.
• For all sample types, the nature, quality
and appropriateness of the sample
preparation technique.
Collection of half core ensured the nature, quality and
appropriateness of the collected sample.
• Quality control procedures adopted for
all subsampling stages to maximise
representivity of samples.
Half core was collected for the entirety of the Tesoro
drilling, as such there was consistency throughout the
drilling. Core was logged by a qualified geoscientist.
Each subsample is considered to be representative of
the interval.
• Measures taken to ensure that the
sampling is representative of the in-situ
material collected, including for instance
results for field duplicate/second-half
sampling.
Sampling of half core is representative of the in-situ
material. There are field duplicate samples collected
from the diamond core with irregular results. Field drill
core duplicates are irregular by nature and it has been
recommended by Tesoro’s consultants to use coarse
reject material to monitor the sample preparation.
• Whether sample sizes are appropriate to
the grain size of the material being
sampled.
Sample sizes collected were considered appropriate
to reasonably represent the material being tested.
• The nature, quality and appropriateness
of the assaying and laboratory
procedures used and whether the
technique is considered partial or total.
Assays reported in this report were undertaken at the
accredited laboratory of ALS Santiago, which is fully
certified. Core samples of various lengths were
assayed (minimum 0.25m) from which 1kg of material
was pulverized passing 200 mesh to produce a 50 g
charge for fire assay fusion with gravimetric finish.
Multielement assays were completed by 4-acid digest
with a 2.5 g charge.
TESOROGOLD.COM.AU
Tesoro consider the data to be of an appropriate level
of detail to support a future resource estimation.
The sample preparation of crushing half core at the
lab to mm size prior to splitting off a 50g charge (either
by cone/quarter or riffle) for pulverisation provides an
appropriate and representative sample for analysis.
8
ASX ANNOUNCEMENT 28 OCTOBER 2024
Criteria
JORC Code explanation
Commentary
All techniques are appropriate for the element being
determined.
Verification of
sampling and
assaying
• For geophysical tools, spectrometers,
handheld XRF instruments, etc., the
parameters used in determining the
analysis including instrument make and
model, reading times, calibrations
factors applied and their derivation, etc.
Standard chemical analyses were used for grade
determination. There was no reliance on determination
of analysis by geophysical tools.
• Nature of quality control procedures
adopted (e.g. standards, blanks,
duplicates, external laboratory checks)
and whether acceptable levels of
accuracy (i.e. lack of bias) and precision
have been established.
QAQC procedures included the insertion of Certified
Reference Materials (CRMs) (5%) and blank material
(2%), Check samples (5%) and check assaying (5%)
Cube Consulting Pty Ltd manage the database for
Tesoro.
The laboratories used have generally demonstrated
analytical accuracy at an acceptable level within 95%
confidence limits.
• The verification of significant intersections A number of independent consulting geoscientists
by either independent or alternative
(Cube Consulting, Oliver, and Cooley) external to
company personnel.
Tesoro have verified the intersections for holes
ZDDH0001 to ZDDH0080. Holes ZDDH0081 onwards
have been verified by multiple appropriately qualified
Company personnel.
• The use of twinned holes.
No twinned holes have been completed
Tesoro drilling is digitally entered and stored following
• Documentation of primary data, data
entry procedures, data verification, data documented core handling protocols.
The protocols are considered adequate.
storage (physical and electronic)
protocols.
No adjustments were made to Tesoro Drilling
• Discuss any adjustment to assay data.
Location of data • Accuracy and quality of surveys used to
locate drillholes (collar and downhole
points
surveys), trenches, mine workings and
other locations used in Mineral Resource
estimation.
Data spacing
and distribution
Orientation of
data in relation
to geological
structure
Sample security
Tesoro drill hole collars have been surveyed accurately
using differential GPS for all holes.
• Specification of the grid system used.
The grid system used PSAD56 19S
• Quality and adequacy of topographic
control.
The topography generated from an accurate
topographic survey data completed by a registered
surveyor and has been used for the current control.
Drill hole spacing is variable between 25m and 200m
• Data spacing for reporting of Exploration
Results.
• Whether the data spacing and
distribution is sufficient to establish the
degree of geological and grade
continuity appropriate for the Mineral
Resource and Ore Reserve estimation
procedure(s) and classifications applied.
Areas with up to 50m drill spacing are considered to be
suitable for Mineral Resource Estimation. Areas of
sparser drilling and at the fringes and depth extents of
the deposit have been excluded from the MRE.
• Whether sample compositing has been
applied.
Sample compositing was not employed at the
sampling stage.
• Whether the orientation of sampling
achieves unbiased sampling of possible
structures and the extent to which this is
known, considering the deposit type.
Drill holes were drilled across the interpreted strike of
the mineralisation.
• If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to
have introduced a sampling bias, this
should be assessed and reported if
material.
Tesoro diamond drilling at various orientations does not
reveal any bias regarding the orientation of the
mineralised horizons.
• The measures taken to ensure sample
security.
Chain of Custody of digital data is managed by the
Company. Physical material was stored on site and,
when necessary, delivered to the assay laboratory.
TESOROGOLD.COM.AU
Where drill spacing is beyond 50m mineralisation has
been interpreted to continue and have been used in
the estimation of the Exploration Target. Drill spacing
up to 200m has been used in the Exploration Target
Estimation
9
ASX ANNOUNCEMENT 28 OCTOBER 2024
Criteria
JORC Code explanation
Commentary
Thereafter laboratory samples were controlled by the
nominated laboratory which to date has been Bureau
Veritas and ALS Santiago. All sample collection was
controlled by digital sample control file(s) and
hardcopy ticket books.
Audits or reviews • The results of any audits or reviews of
sampling techniques and data.
No audits have been undertaken.
Section 2: Reporting of Exploration Results
Criteria
JORC Code explanation
Commentary
Mineral
tenement
and land
tenure status
• Type, reference name/number, location
and ownership including agreements or
material issues with third parties such as
joint ventures, partnerships, overriding
royalties, native title interests, historical
sites, wilderness or national park and
environmental settings.
Information regarding tenure is included in the company’s
June 2024 quarterly report released to the ASX on 29 July
2024.
• The security of the tenure held at the
time of reporting along with any known
impediments to obtaining a licence to
operate in the area.
The Concessionsare believed to be in good standing with
the governing authority and there is no known
impediment to operating in the area.
Exploration
done by
other parties
• Acknowledgment and appraisal of
exploration by other parties.
Little historical exploration has been undertaken in either
project area. Coeur d’Alene’s Chilean exploration division
undertook activities on the Ternera prospect, under an
option agreement with the previous owners between April
1990 and January 1993.
Geology
• Deposit type, geological setting and
style of mineralisation.
The mineralisation model is considered to be an intrusive
related gold deposit. The key characteristics that are
consistent with this style deposit include:
Tesoro Resources Ltd, 95% owned Chilean subsidiary,
Tesoro Mining Chile SpA, owns 94.42% of the El Zorro Gold
Project Concessions.
• Low sulphide content, (typically <5%); reduced ore
mineral assemblage that typically comprises pyrite and
lacks primary magnetite or hematite
• Mineralisation occurs as sheeted vein deposits or
stockwork assemblages and often combine gold with
variably elevated Bi, W, As, Mo, Te, and/or Sb but low
concentrations of base metals as seen in the initial four
holes by Tesoro at El Zorro
• Restricted and commonly weak proximal hydrothermal
alteration
• Intrusions of intermediate to felsic composition.
Drillhole
information
• A summary of all information material to
the understanding of the exploration
results including a tabulation of the
following information for all Material
drillholes:
Relevant information is presented in this report.
o easting and northing of the drillhole
collar
o elevation or RL (Reduced Level –
elevation above sea level in metres)
of the drillhole collar
o dip and azimuth of the hole
o downhole length and interception
depth
o hole length.
• If the exclusion of this information is
justified on the basis that the information
is not Material and this exclusion does
not detract from the understanding of
the report, the Competent Person
should clearly explain why this is the
case.
TESOROGOLD.COM.AU
10
ASX ANNOUNCEMENT 28 OCTOBER 2024
Criteria
JORC Code explanation
Commentary
Data
aggregation
methods
• In reporting Exploration Results,
weighting averaging techniques,
maximum and/or minimum grade
truncations (e.g. cutting of high grades)
and cut-off grades are usually Material
and should be stated.
Significant intercepts have been calculated as downhole
width weighted averages. No top cut has been used.
• Where aggregate intercepts
incorporate short lengths of high-grade
results and longer lengths of low-grade
results, the procedure used for such
aggregation should be stated and
some typical examples of such
aggregations should be shown in detail.
Relevant information is presented in this report.
• The assumptions used for any reporting
of metal equivalent values should be
clearly stated.
No metal equivalents are reported.
Relationship
between
mineralisation
widths and
intercept
lengths
• These relationships are particularly
important in the reporting of Exploration
Results.
• If the geometry of the mineralisation
with respect to the drillhole angle is
known, its nature should be reported.
The mineralisation forms sub-vertical sheeted veins and
individual veins and may form plunging zones within the
mineralised structures. Drilling by Tesoro has been
undertaken to test these orientations.
• If it is not known and only the downhole
lengths are reported, there should be a
clear statement to this effect (e.g.
‘downhole length, true width not
known’).
Diagrams
• Appropriate maps and sections (with
scales) and tabulations of intercepts
should be included for any significant
discovery being reported These should
include, but not be limited to a plan
view of drillhole collar locations and
appropriate sectional views.
Relevant maps and diagrams are included in the body of
the report.
Balanced
reporting
• Where comprehensive reporting of all
Exploration Results is not practicable,
representative reporting of both low
and high grades and/or widths should
be practiced to avoid misleading
reporting of Exploration Results.
Relevant information is presented in this report.
Other
substantive
exploration
data
• Other exploration data, if meaningful
and material, should be reported
including (but not limited to): geological
observations; geophysical survey results;
geochemical survey results; bulk
samples – size and method of
treatment; metallurgical test results; bulk
density, groundwater, geotechnical
and rock characteristics; potential
deleterious or contaminating
substances.
All material exploration data is reported in the body of the
report.
Further work
• The nature and scale of planned further
work (e.g. tests for lateral extensions or
depth extensions or large-scale step-out
drilling).
Further work will be focused on drill testing the Ternera
mineralisation and additional prospects as defined in the
work program. Core will be used for metallurgical testwork
and further resource modelling is planned.
• Diagrams clearly highl
Share your feedback
Discover